Wednesday , 29 March 2017

Reset Page Count Xerox Phaser 3140

Reset Page Counter Xerox Phaser 3140 : $10 USD


Your Printer's name:

(*) Find Printer's Name

Your Printer's Version:

(*) How to find Version?

Your printer's serial number:

(*) Find serial number

Your printer's chip crum number:

How to find CRUM?

Your E-Mail:

(*)

(*) Please fill request field

 

Xerox Phaser 3140 Reset Overview:

– Product name: Xerox Phaser 3140 Permanent Reset Page Counter.

– Version: 77f, V1.50.00.73f.

– Compatible models: Xerox Phaser 3140.

– Compatible toner cartridges: 108R00908, 108R00909.

– Functional: reset page counter Xerox Phaser 3140, fix Xerox Phaser 3140 toner cartridge errors with red light and red light blinking: install new toner cartridge, toner life end, replace new toner cartridge, toner empty, toner exhausted…Makes Xerox Phaser 3140 printer to work without toner chip

How to Reset Page Counter Xerox Phaser 3140

Reset Page Counter Xerox Printer

– Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip – a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.

– And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the “UPS” (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

This firmware will be installed directly to your printer. Before opening firmare make sure that printer is turned on and connected to your computer and printer drivers are installed correctly.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!

1. Connect the printer to the computer by usb cable and turn it on
2. Wait until the printer is ready for work
3. Drag and drop *.hd to usbprns2.exe
4. The reprogramming process starts automatically
5. Wait until the printer reprograms (5 – 10 minute) and restarts
6. After that the reprogramming process is finished, use tapes to cover toner chip and restart the printer

Reset Page Counter Xerox Phaser 3140 : $10 USD


Your Printer's name:

(*) Find Printer's Name

Your Printer's Version:

(*) How to find Version?

Your printer's serial number:

(*) Find serial number

Your printer's chip crum number:

How to find CRUM?

Your E-Mail:

(*)

(*) Please fill request field

 

Reset Xerox Phaser 3140 Search Terms

- Xerox Phaser 3140 Reset.
- Fix Xerox Phaser 3140 Toner Errors: install new toner cartridge, toner life end, replace new toner cartridge, toner empty, toner exhausted...
- Permanent reset chip Xerox Phaser 3140.
- Permanent reset page counter Xerox Phaser 3140.
- Xerox Phaser 3140 Firmware Reset.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

Scroll To Top