Epson B30 Waste Ink Pad Counter Reset

Reset Epson B30

Are you encountering an error message on your Epson B30 printer, indicating that the waste ink pad counter is full? This issue can prevent you from printing until it is resolved. However, don’t worry; there is a straightforward solution called resetting the waste ink pad counter.

The waste ink pad is a sponge-like material that absorbs and stores excess ink during printer maintenance cycles. Over time, this pad becomes saturated and needs to be replaced or reset. Resetting the waste ink pad counter is a cost-effective solution that allows you to continue using your printer without any interruptions.

To reset the waste ink pad counter on your Epson B30 printer, follow these steps:

1. Download a reset utility tool compatible with your printer model from a reliable source.

2. Install the reset utility tool on your computer, ensuring it is suitable for your operating system.

3. Connect your Epson B30 printer to your computer using a USB cable.

4. Open the reset utility tool and select the printer model you want to reset.

5. Click on the “Reset Waste Counters” or similar option provided in the tool.

6. Wait for the reset process to complete, and then disconnect your printer from the computer.

7. Turn off your Epson B30 printer and wait for a few minutes.

8. Turn on the printer again, and the waste ink pad counter should now be reset.

By following these steps, your Epson B30 printer’s waste ink pad counter will be successfully reset, allowing you to continue printing without any issues.

Please note that resetting the waste ink pad counter only temporarily resolves the problem. It is advisable to replace the waste ink pad or seek professional assistance if the issue persists.

|You are flipping through: Reset Epson B30 at printerkeys.com

Download Epson B30 Resetter

– Epson B30 Resetter For Windows: Download
– Epson B30 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson B30

1. Read Epson B30 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson B30 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson B30 off then on

5. Check Epson B30 Counter

#Get to the remaining information https://printerkeys.com/wicreset-key-a-solution-to-reset-epson-b1100-printer.html

Reset Epson B30 Waste Ink Pad Counter on Youtube

– Video Reset Epson B30 Waste Ink Pad Counter on YouTube, as of the current time, has received 7 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@printerkeys19.