Epson C41 Waste Ink Pad Counter Reset

Reset Epson C41

Are you struggling with the waste ink pad counter of your Epson C41 printer? Don’t worry, we have the solution for you! In this article, we will guide you through the process of resetting the waste ink pad counter, so that you can continue using your printer without any issues.

The waste ink pad counter is a mechanism in Epson printers that keeps track of the amount of ink wasted during cleaning cycles. Over time, this counter can reach its maximum limit, causing your printer to stop working. Resetting the counter is necessary in order to ensure the smooth functioning of your printer.

To reset the waste ink pad counter of your Epson C41 printer, you will need to follow these steps:

1. Turn off your printer and unplug it from the power source.

2. Press and hold the Resume button on the printer while simultaneously pressing and holding the Power button. Keep both buttons pressed for about 10 seconds.

3. Release the Resume button, but continue holding the Power button until the green LED light turns on.

4. Now, release the Power button. The LED light will flash for a few seconds, indicating that the counter has been successfully reset.

5. Finally, plug in your printer and turn it on. You should now be able to use your printer without any issues.

It is important to note that resetting the waste ink pad counter should only be done if you have already replaced or cleaned the waste ink pads. Otherwise, it is recommended to seek professional assistance.

In conclusion, resetting the waste ink pad counter of your Epson C41 printer is a simple and effective solution to keep your printer running smoothly. By following the steps outlined in this article, you can overcome this obstacle and resume your printing tasks with ease.

|You are inspecting the document: Reset Epson C41 at printerkeys.com

Download Epson C41 Resetter

– Epson C41 Resetter For Windows: Download
– Epson C41 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson C41

1. Read Epson C41 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson C41 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson C41 off then on

5. Check Epson C41 Counter

#Explore the next chapter https://printerkeys.com/reset-ciss-for-epson-stylus-photo-c120.html

Reset Epson C41 Waste Ink Pad Counter on Youtube

– Video Reset Epson C41 Waste Ink Pad Counter on YouTube, as of the current time, has received 83 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@hethongbaotri9031.