Epson C87 Waste Ink Pad Counter Reset

Reset Epson C87

If you are a proud owner of an Epson C87 printer, you might have encountered the “Waste Ink Pad Counter” issue. This error occurs when the printer’s internal waste ink pads are full, and it requires a reset in order to continue functioning properly. In this article, we will guide you on how to reset the Epson C87 Waste Ink Pad Counter, saving you from potential headaches and costly repairs.

Firstly, it’s important to understand why this issue occurs. Waste ink pads are used to collect the ink that is expelled during cleaning and maintenance cycles performed by the printer. Over time, these pads can become full, causing the printer to stop working. Fortunately, you can reset the counter and continue using the printer by following these steps:

1. Download and install the Epson C87 Reset Utility tool from a reliable source.
2. Ensure that your printer is connected and turned on.
3. Open the Reset Utility tool and select your printer model.
4. Click on the “Reset Waste Counters” button to start the process.
5. Wait for the tool to reset the waste ink counter and display a success message.
6. Turn off your printer and unplug it for a few minutes.
7. Plug the printer back in, turn it on, and check if the issue has been resolved.

It’s important to note that resetting the Waste Ink Pad Counter should only be done as a temporary solution. Eventually, the ink pads will need to be replaced or cleaned, and it is recommended to contact an authorized service center for more information on how to perform this maintenance.

In conclusion, resetting the Epson C87 Waste Ink Pad Counter is a relatively simple process that can save you from potential printer issues. However, it’s crucial to address the root cause of the problem by properly maintaining and servicing your printer.

|You are researching: Reset Epson C87 at printerkeys.com

Download Epson C87 Resetter

– Epson C87 Resetter For Windows: Download
– Epson C87 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson C87

1. Read Epson C87 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson C87 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson C87 off then on

5. Check Epson C87 Counter

#Access the supplemental information https://printerkeys.com/resetting-the-waste-ink-pad-counter-of-epson-stylus-c86.html

Reset Epson C87 Waste Ink Pad Counter on Youtube

– Video Reset Epson C87 Waste Ink Pad Counter on YouTube, as of the current time, has received 1926 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@wicresetkey675.