Epson CX4500 Waste Ink Pad Counter can be reset.

Reset Epson CX4500

Resetting the Epson CX4500 Waste Ink Pad Counter is a crucial maintenance task to ensure the smooth functioning of this printer model. The waste ink pad counter keeps track of the number of printouts and alerts the user when the ink pads are saturated with waste ink. When the waste ink pad counter reaches its limit, the printer stops working, and an error message is displayed.

Resetting the waste ink pad counter can be done by following a few simple steps. First, make sure the printer is turned off and no paper is loaded. Then, simultaneously press and hold the “Power” and “Stop” buttons. While holding them, press and release the “Power” button to turn the printer on. Keep holding the “Power” and “Stop” buttons until the “Maintenance” light starts flashing. This indicates that the printer is in maintenance mode.

To reset the waste ink pad counter, press the “Color” button. The “Variation” and “Ink Out” lights should start flashing alternately. When this happens, press the “Black” button. After a few seconds, all the lights should stop flashing, indicating that the counter has been reset. Turn off the printer, wait for a few seconds, and then turn it back on. The waste ink pad counter should now be reset, and the printer should be ready to use again.

Regularly resetting the waste ink pad counter is crucial to prevent the printer from permanently stopping working due to the ink pads being saturated. By following the above steps, printer owners can ensure their Epson CX4500 continues to print with efficiency and reliability.

|You are looking over with care: Reset Epson CX4500 at printerkeys.com

Download Epson CX4500 Resetter

– Epson CX4500 Resetter For Windows: Download
– Epson CX4500 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson CX4500

1. Read Epson CX4500 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson CX4500 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson CX4500 off then on

5. Check Epson CX4500 Counter

#Go through the complete text https://printerkeys.com/reset-epson-cx4100-cx4200-cx4700-cx4800-dx4200-dx4250-dx4800-dx4850.html

Reset Epson CX4500 Waste Ink Pad Counter on Youtube

– Video Reset Epson CX4500 Waste Ink Pad Counter on YouTube, as of the current time, has received 1885 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@hethongbaotri9031.