How to Reset the Waste Ink Pad Counter for Epson NX410

Reset Epson NX410

Resetting the waste ink pad counter on your Epson NX410 printer can prolong its lifespan and improve its performance over time. The waste ink pad is a sponge-like material that absorbs the excess ink generated during printing and maintenance cycles. Eventually, this pad becomes saturated and needs to be reset to continue functioning properly.

To reset the waste ink pad counter on your Epson NX410 printer, follow these steps:

1. Ensure that your printer is turned off and disconnected from any power source.
2. Press and hold the “Stop,” “Maintenance,” and “Power” buttons simultaneously.
3. While holding these buttons, connect the printer to a power source, and continue holding until the printer displays a message saying “Init” or “Maintenance.”
4. Release the buttons and press the “Color” button to allow the printer to start the ink pad counter reset process.
5. Wait for the printer to complete the reset process and turn off automatically.
6. Disconnect the printer from the power source, then reconnect and turn it on.
7. Your waste ink pad counter should now be reset, and you can continue using your Epson NX410 printer without any issues.

Regularly resetting the waste ink pad counter is essential for maintaining the optimal performance of your Epson NX410 printer. It prevents the waste ink pad from becoming oversaturated, which may lead to ink leakage or other printer malfunctions.

Remember to always perform the waste ink pad counter reset process in a well-ventilated area, as the printer’s maintenance cycles may release small amounts of ink and odor. Additionally, make sure to dispose of any waste ink properly, as it may contain harmful chemicals.

By resetting the waste ink pad counter on your Epson NX410 printer, you can enjoy continued high-quality printing and a longer printer lifespan.

|You are reading attentively: Reset Epson NX410 at printerkeys.com

Download Epson NX410 Resetter

– Epson NX410 Resetter For Windows: Download
– Epson NX410 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson NX410

1. Read Epson NX410 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson NX410 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson NX410 off then on

5. Check Epson NX410 Counter

#Explore the upcoming section https://printerkeys.com/how-to-reset-the-waste-ink-pad-counter-for-epson-stylus-nx409.html

Reset Epson NX410 Waste Ink Pad Counter on Youtube

– Video Reset Epson NX410 Waste Ink Pad Counter on YouTube, as of the current time, has received 140 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@wicresetkey675.