Instructions on How to Reset the Waste Ink Pad for Epson EcoTank ET 2760

Reset Epson ET-2760

If you own an Epson EcoTank ET 2760 printer, you may encounter a common issue over time – the Waste Ink Pad warning. When this warning appears on your printer, it means that the printer’s waste ink pad, which absorbs excess ink during printing, is nearing its limit and needs to be reset or replaced. The Waste Ink Pad is an important part of the printer’s maintenance system, and resetting it can help extend the lifespan of your printer.

To reset the Waste Ink Pad on your Epson EcoTank ET 2760, follow these steps:

1. Turn off your printer and unplug it from the power source. This will ensure your safety during the reset process.

2. Locate the waste ink pad, which is usually located at the bottom of the printer. You may need to refer to your printer’s manual for precise instructions on how to access it.

3. Carefully remove the waste ink pad from the printer. Be cautious as it may contain excess ink.

4. Rinse the waste ink pad under running water to remove the ink residue. Make sure to squeeze out any excess water and allow it to dry completely.

5. Once the waste ink pad is dry, place it back into its original position in the printer.

6. Plug in your printer and turn it on. Press and hold the “Power” button while simultaneously pressing the “Maintenance” button.

7. Release both buttons when you see the maintenance mode menu on the printer’s screen.

8. Select the option to reset the Waste Ink Pad. The printer will now reset the page number count associated with the Waste Ink Pad and the warning message should disappear.

Remember that resetting the Waste Ink Pad is a temporary solution, and eventually, you may need to replace the pad to ensure optimal printer performance. It is always recommended to consult the Epson customer support or authorized service center for guidance and assistance with any technical issues.

|You are skimming: Reset Epson ET-2760 at printerkeys.com

Download Epson ET-2760 Resetter

– Epson ET-2760 Resetter For Windows: Download
– Epson ET-2760 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson ET-2760

1. Read Epson ET-2760 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2760 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson ET-2760 off then on

5. Check Epson ET-2760 Counter

#Dive into the subsequent segment https://printerkeys.com/guide-resetting-the-epson-et-2756-adjustment-program-and-resetting-the-waste-ink-pad-counter-using-the-epson-et2756-key-resetter-euro.html

How to Reset Waste Ink Pad for Epson EcoTank ET 2760 on Youtube

– Video How to Reset Waste Ink Pad for Epson EcoTank ET 2760 on YouTube, as of the current time, has received 52007 views with a duration of 9:28, taken from the YouTube channel: youtube.com/@BCHTechnologies.