Resetting Epson K201 Waste Ink Pad Counter

Reset Epson K201

Resetting the waste ink pad counter on your Epson K201 printer is an essential maintenance task that ensures the smooth functioning and longevity of your device. Over time, the ink pads in your printer accumulate excess ink, which can lead to printing errors and reduced print quality. Resetting the waste ink pad counter allows you to start fresh, eliminating these issues.

To reset the waste ink pad counter, follow these steps:

1. Download the reset utility software for Epson K201 from a trusted source or the official Epson website.

2. Install the software on your computer and launch it.

3. Connect your Epson K201 printer to the computer using a USB cable.

4. Open the reset utility software and select your printer model from the list.

5. Click on the “Reset Waste Counters” or similar button to initiate the reset process.

6. Wait for the software to reset the waste ink pad counter. This may take a few minutes, so be patient.

7. Once the process is complete, you will receive a notification or confirmation message.

8. Disconnect the printer from the computer and power it off.

9. Power on the printer and perform a test print to ensure that the waste ink pad counter has been successfully reset.

By resetting the waste ink pad counter, you can prolong the life of your Epson K201 printer and maintain its optimal performance. Remember to perform this maintenance task regularly to avoid any printing issues caused by the accumulation of ink waste. If you encounter any difficulties in resetting the waste ink pad counter, refer to the user manual or contact Epson customer support for assistance.

|You are scrutinizing the article: Reset Epson K201 at printerkeys.com

Download Epson K201 Resetter

– Epson K201 Resetter For Windows: Download
– Epson K201 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson K201

1. Read Epson K201 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson K201 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson K201 off then on

5. Check Epson K201 Counter

#Read the following section https://printerkeys.com/step-by-step-guide-on-resetting-the-epson-k200-using-the-epson-k200-adjustment-program.html

Reset Epson K201 Waste Ink Pad Counter on Youtube

– Video Reset Epson K201 Waste Ink Pad Counter on YouTube, as of the current time, has received 32 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@printerkeys19.