Resetting the Waste Ink Pad Counter of Epson R1800

Reset Epson R1800

If you own an Epson R1800 printer, you may have encountered an error message indicating that the waste ink pad counter is full. This can be a frustrating situation, as it prevents you from using your printer until the issue is resolved. However, there is a simple solution to this problem by resetting the waste ink pad counter.

The waste ink pad is an absorbent pad located inside your printer, which collects any excess ink during printing and cleaning cycles. Over time, the pad can become saturated and needs to be replaced or reset to continue using the printer.

To reset the waste ink pad counter on your Epson R1800 printer, you can follow these steps:

1. Make sure the printer is turned off and unplugged from the power source.
2. Press and hold the “Paper Feed,” “Cleaning,” and “Roll Paper” buttons simultaneously.
3. While holding these buttons, turn on the printer and continue holding until the “Cleaning” and “Roll Paper” lights flash alternately.
4. Release the buttons and press the “Cleaning” button once, and the printer will start the reset process.
5. Wait for the printer to complete the process and turn off automatically.
6. Once the printer is off, you can turn it back on, and the waste ink pad counter should be reset.

It is important to note that resetting the waste ink pad counter does not physically replace or clean the ink pad. It is merely a software reset that allows you to continue using the printer temporarily. It is advisable to service or replace the ink pad eventually to avoid any potential damage to your printer.

By following these steps, you can resolve the waste ink pad counter error on your Epson R1800 printer, and continue enjoying high-quality prints.

|You are studying closely: Reset Epson R1800 at printerkeys.com

Download Epson R1800 Resetter

– Epson R1800 Resetter For Windows: Download
– Epson R1800 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson R1800

1. Read Epson R1800 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson R1800 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson R1800 off then on

5. Check Epson R1800 Counter

#See what comes next https://printerkeys.com/{{null}}.html

Reset Epson R1800 Waste Ink Pad Counter on Youtube

– Video Reset Epson R1800 Waste Ink Pad Counter on YouTube, as of the current time, has received 2455 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@printerchannel7303.