Step-by-Step Guide on Resetting the Ink Pad of an Epson L1800 Printer

Reset Epson L1800

When using an Epson L1800 printer, you may encounter a message indicating that the ink pad is full and needs to be reset. This can be a frustrating issue to deal with, but fortunately, there is a simple solution. In this step-by-step guide, we will show you how to reset the ink pad on your Epson L1800 printer.

Step 1: Turn off the printer and unplug the power cord from the electrical outlet. This will ensure your safety during the reset process.

Step 2: Locate the Maintenance button on the printer’s control panel. It is usually represented by a droplet icon. Press and hold this button.

Step 3: While still holding the Maintenance button, press the power button to turn the printer on. Keep both buttons pressed for a few seconds until you see the maintenance mode menu.

Step 4: Once the maintenance mode menu appears, release the Maintenance button. Use the arrow buttons on the control panel to navigate to “Waste ink pad counter” and press the OK button.

Step 5: Select “Reset Main Pad Counter” from the options presented and press OK to confirm.

Step 6: After the reset is complete, the printer will display a message confirming the process. Press the power button to turn off the printer.

Step 7: Finally, plug the power cord back into the electrical outlet and turn on the printer. The ink pad should now be successfully reset.

By following these simple steps, you can easily reset the ink pad on your Epson L1800 printer. This will allow you to continue using your printer without any interruption or error messages. Remember to periodically check and reset the ink pad to maintain optimal printer performance.

|You are scrutinizing the article: Reset Epson L1800 at printerkeys.com

Download Epson L1800 Resetter

– Epson L1800 Resetter For Windows: Download
– Epson L1800 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson L1800

1. Read Epson L1800 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson L1800 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson L1800 off then on

5. Check Epson L1800 Counter

#Investigate more thoroughly https://printerkeys.com/resetting-epson-printer-l132-using-resetter-adjustment-program-a-step-by-step-guide.html

How to Reset Ink Pad on Epson L1800 Printer? Step by Step Guide on Youtube

– Video How to Reset Ink Pad on Epson L1800 Printer? Step by Step Guide on YouTube, as of the current time, has received 3331 views with a duration of 2:17, taken from the YouTube channel: youtube.com/@BilalKhalid.