Resetting the Epson L130: A Step-by-Step Guide

Reset Epson L130

Resetting an Epson L130 printer can be a useful troubleshooting step, especially if you encounter errors or issues while using it. Resetting the printer can help resolve various problems and can also help improve its performance. Here are some steps to guide you on how to reset an Epson L130 printer.

1. First, ensure that the printer is turned off and disconnected from the power source.

2. Locate and press the power button while holding down the “Maintenance” and “Paper” buttons simultaneously. Keep holding these buttons until the power LED light starts flashing.

3. Next, release the “Maintenance” and “Paper” buttons simultaneously. The printer will power on briefly and then turn off.

4. After a few moments, turn on the printer again by pressing the power button. The printer will now have been reset to its default settings.

5. It is essential to note that resetting the printer will also clear any error messages or settings you might have previously configured. Therefore, it is recommended to take note of any important settings before performing a reset.

6. Additionally, make sure to reinstall the printer drivers on your computer after resetting the printer to ensure proper functioning.

By following these steps, you can reset your Epson L130 printer and potentially resolve any issues you may be experiencing. However, if the problem persists, it is advisable to consult the printer’s user manual or contact Epson customer support for further assistance. Remember to always perform a reset as a last resort after exhausting other troubleshooting steps.

|You are examining: Reset Epson L130 at printerkeys.com

Download Epson L130 Resetter

– Epson L130 Resetter For Windows: Download
– Epson L130 Resetter For MAC: Download

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

How to Reset Epson L130

1. Read Epson L130 Waste Ink Pad Counter:

If Resetter shows error: I/O service could not perform operation… same as below picture:

==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson L130 Waste Ink Pad Counter

– Buy Serial Key:

Wicreset key

Fix Epson red lights blinking with errors: Service Required, A printer's ink pad at the end of its service life Please contact Epson Support.

3. Put Serial Key:

4. Wait 30s, turn Epson L130 off then on

5. Check Epson L130 Counter

#Investigate further https://printerkeys.com/free-guide-on-how-to-reset-epson-l1218-l1258-l1259-l3218-l3219-l3251-l3253-l3255-l3256-l3258-l3266.html

How to Reset Epson L130 on Youtube

– Video How to Reset Epson L130 on YouTube, as of the current time, has received 11759 views with a duration of 2:07, taken from the YouTube channel: youtube.com/@Nosware.